I always wanted to hear my voice. I tried recording on an old cassette but didn't like the results and it was hard to rewind exactly at the point at which my voice was heard. Thankfully the technology evolved and now, with the help of microphones and computers, I can hear my voice crystal clear. However, to make a microphone work in Windows Vista, sometimes you need to do a few little extra steps than the regular plug and play. So, with that said, in this article we will show you how to quickly make your microphone work in Windows Vista.
Setting up the Microphone
Before you start communicating with your computer you need to have a microphone set up. To do this, plug the microphone into your computer. Generally, the color of the microphone jack has the same color as the slot you need to plug it into. If that is not the case, then consult the manual of the sound card and see what is the appropriate port for the microphone.
Next, click on the Start Menu button and click on Control Panel.
Once the Control Panel window opens, click on Hardware and Sound.
When you are in the Hardware and Sound list, click on em>Sound.
In the Sound window you have three tabs: click on the Recording tab.
Once you are in the Recording tab, right click on the microphone device you just plugged in and select the 'Set as Default Device' option.
Now, to test and see if it really works, tap the microphone with your finger a few times. In the Sounds window, the empty lines next to the default microphone should fill up with a green color.
If you are in the Recording tab and you can’t see your microphone device, right click on any device shown in the Recording tab. In the contextual menu, click 'Show Disabled devices' if it isn’t marked with a check sign.
If you still can’t see your microphone, you might have not plugged it properly or you need to install a driver for it to work. In the first case, check to see if you have plugged it properly into your computer, plug it again or, if it is on a USB port, plug it in another USB port. As for the second case, use the drivers from the manufacturer’s site or from the CD that came along with the product.
Read the text aloud
At this point Windows Vista may still not recognize that the microphone has been activated. So we need to make Windows Vista aware of the tone and sound of our voice.
Important: The following steps will be also done in the Windows Speech Recognition article so, if you came to this article from that one, you can now go to that one and continue reading from there.
Open the Control Panel window and click on Ease of Access.
Now, in the Ease of Access window, click on Set up Microphone.
Choose the microphone device that you currently use and click on the Next button.
A few indications are given and, if they are followed, will give a better user experience. In my case, since I have selected the Headset microphone the indications are as shown in the image. Once you have read the advice given, click on the Next button.
If you accidentally selected the wrong device or want to go back to a previous page of the setup, click on the blue Back arrow positioned in the top left corner of the setup wizard.
Read the given text aloud and, afterwards, click on the Next button.
In some cases the microphone does not work in the wizard setup, although it might be enabled and functions properly according to the Recording tab. If this happens, close the wizard setup and, after you checked to see you have the correct microphone device enabled, open the setup wizard again.
In my case, for example, I have activated the microphone on the headset only when I got to this step and it doesn’t seem to work. A few taps on the microphone shows me that it works in the Recording tab, but does not work in the setup wizard, so I must restart the wizard setup.
Now, assuming you read the text and clicked on the Next button, the wizard setup will tell you that the microphone has been set up and also you will be prompted about setting up the Speech Recognition by pressing the Finish button.
If you encountered any problems while setting up your microphone and you managed to solve them, let us know about it. Others might find useful the solution you have found.
No comments:
Post a Comment